Page 44: Embroidered Jackets and Outerwear

• 90/10 polyester/spandex
• Warmth-retaining synthetic down insulation
• Pillow Tech quilted, three-layer fabric
• Top and base layers: lightweight, four-way stretch woven
• Modern fit
• 2 1/4" wide dyed-to-match matte enamel 2 snap closure cuffs
• Dyed-to-match matte enamel snap front placket
• 2 chest pockets with secure snap and angled flap closure
• Spyder bug woven loop label on left chest pocket
• 4-way stretch yoke and side panels
• Spyder wordmark rubberized screenprint on back right shoulder
• Spyder branded label on lower front placket

• 3.5 oz./yd_, 100% polyester 2 layer, 4-way stretch dewspo bonded to waterproof membrane
• Topography print interior
• Level 3 Storm Shield
• Teflon EcoElite C0 durable water repellent finish
• Waterproof and seam sealed, 10,000 mm
• Three-piece scuba hood with wire edge visor and exterior adjustable cord locks
• 3M reflective trim at hood, shoulder and forearm
• Interior storm flap with chin guard for comfort
• Waterproof center full front zipper
• Exterior chest and hand pockets with covered zippers
• Adjustable hook-and-loop elasticized cuffs
• Covered side zip openings on both sides for ventilation
• Drop tail hem for extra coverage with adjustable cord locks on both sides

• 2.5 oz./yd_, 100% micro-polyester
• Lined with 100% polyester taffeta
• Water-resistant
• 1x1 rib-knit v-neck collar, cuffs and waistband
• Side seam pockets
• Woven label

• Liner Jacket Lining: 100% polyester taffeta
• Shell: 3.5 oz./yd_ (US), 5.8 oz./L yd (CA), 100% nylon 228T taslan
• Lining:100% polyester mesh in upper body
• UTK 3 temperature range, 30F to -9F / -1C to -23C
• Storm flap with security zippered pocket
• Inside placket
• Thermal retention shockcord at waist, hem and hood
• Zip-off hood
• reflective piping along yoke
• adjustable cuffs with tabs
• EZEM system

• 8.3-ounce 100% polyester
• Twill-taped neck
• Reverse coil zipper
• Chin guard
• Knotted zipper pulls
• Front zippered pockets

• 6 oz./yd_ (US), 10 oz./L yd (CA), 100% polyester microfleece
• Anti-pill finish
  
• Center front reverse coil zipper with semi auto-lock rubber pull tab
• Triple-needle cover stitch at raglan sleeve and front pockets
• Inseam front side pockets
• Self-fabric gusset at cuffs
• Double-needle stitch at bottom hem

• 100% polyester woven shell bonded to a water-resistant laminated film insert and a 100% polyester microfleece lining
• 1000MM fabric waterproof rating
• 1000G/M2 fabric breathability rating
• Zip-through cadet collar
• Reverse coil zipper
• Front zippered pockets
• Open hem

• 9.7-ounce 96/4 poly/cotton knit shell
• 9.7-ounce 96/4 poly/cotton jacquard knit insets
• Locking reverse coil zipper
• 3-panel hood
• Drop shoulder
• Open pockets
• Longer length
• Curved front hem
• Split back drop tail hem

• 8.6-ounce 95/5 poly/spandex with stay-cool wicking technology
• OGIO heat transfer label for tag-free comfort
• OGIO embossed neck taping
• Black binding around hood and cuffs
• Black reverse-coil locking zipper with chin guard
• Ventilating perforation on center back
• Reflective O on back right shoulder
• Front pockets with mesh lining
• Thumbholes
• Curved back hem

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Encased elastic cuffs
• Adjustable waist drawcord
• Front entry hidden pouch pocket
• Packs into mesh lined pouch pocket
• Champion "C" patch on left sleeve

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 13.6-ounce 100% polyester sherpa fleece body
• 8.3-ounce 52/44/4 poly/cotton/spandex outer collar sleeves and hem
• Exaggerated cowl neck
• OGIO heat transfer label for tag-free comfort
• Exposed molded zippers with debossed O zipper pulls
• O heat transfer on left sleeve

• 100% nylon shell
• 3000MM fabric waterproof rating
• Waterproof zippered chest pocket
• Waterproof front zippered pockets
• Hood with drawcord and toggles for adjustability
• Full-length exterior storm flap with snaps and hook and loop closure
• Two-way Vislon zipper
• Port Pocket for decoration access
• Self-fabric adjustable tab cuffs with hook and loop closures

• 4.6-ounce 100% polyester microfleece
• Coverstitched seams
• Exposed coil zippers
• Open cuffs and hem

• 100% nylon exterior shell
• 100% polyester lining, 60 gm hyper-loft poly fill insulation
• Wind- and water-resistant
• #5 reverse coil zippers at chest and pockets
• Packable into chest pocket with reverse coil zipper
• Capped elastic armhole binding
• Locker loop at wearer's back neck
• Plastic cinche toggle at wearer's right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 88/12 poly/spandex with durable water-repellent (DWR) finish
• Grid microfleece lining for warmth
• 5000MM fabric waterproof rating
• 5000G/M2 fabric breathability rating
• Heat transfer OGIO back neck label
• Molded center front zipper
• Drop shoulder
• Black reflective taping along shoulders and sleeves and down center back
• Zippered side pockets with a hidden mesh pocket for valuables or phone
• Black reflective O heat transfer on front left hem

• 8.5-ounce 87/13 cotton/spandex knit
• Lightly brushed
• OGIO heat transfer label for tag-free comfort
• Center front reverse coil zipper with rubber OGIO pull
• Front flange across body
• Black reflective O heat transfer on front left hem
• Zip-through collar
• Front zippered pockets
• Rib knit cuffs

• 4 oz./yd_ (US), 6.7 oz./L yd (CA), 100% polyester interlock jersey with Pro-Lock technology
• Pro-Lock collections cationic disperse dyed polyester locks in colorfastness to create a bleed-resistant print surface that produces vibrant, crisp graphics.
• Shaped, standard fit with curved bottom hem
• Moisture-management
• Snag resistant
• 2" self-fabric cadet collar
• Dyed-to-match zipper with top and bottom self-fabric covering and locking YKK pull in Black
• Hemmed long sleeves
• UPF rating of 50
• Tear away label for comfort and relabeling

• 100% polyester woven shell bonded to a water-resistant film insert and a 100% polyester microfleece lining
• 92/8 poly/spandex woven shell bonded to a water-resistant film insert and a 100% polyester microfleece lining (Heathers)
• 1000MM fabric waterproof rating
• 1000G/M2 fabric breathability rating
• Wind-resistant water-repellent
• Zip-through cadet collar with chin guard
• Reverse coil zippers
• Front zippered pockets
• Open cuffs and hem

• 4.25 oz./yd_, 100% polyester heathered wicking knit top body, collar, and sleeves
• 3.4 oz./yd_, 100% polyester wicking knit solid bottom body
• Wicks moisture away from the body
• Self-fabric collar
• Set-in sleeves
• Double-needle hemmed bottom and sleeve
• Pad print label

• 4 oz./yd_/140 gsm (US), 6.7 oz./L yd (CA), 100% polyester ripstop
• Fine mesh polyester lining at hood and body
• Fully seam-sealed waterproof shell
• 2,000 mm waterproofness, 2,000 g breathability
• Roll-away adjustable hood
• Adjustable shockcord at hood and drop back hem
• Storm flap with snap closure at bottom, chin guard
• Reflective piping at shoulder yoke and center back yoke
• Elasticized cuffs, underarm and back vent system for added breathability
• Center front auto-lock zipper with reflective toggle
• Lower front concealed zippered pockets with reflective toggle