Custom embroidered wind resistant outerwear

• 5.2 oz./yd_, 97/3 recycled polymide/elastane
• Durable water resistant - PFC free
• Full-zip closure
• Large front pockets
• Embroidered logo on left chest

• 100% polyester durable ripstop fabric
• High pile sherpa lining
• Eco Storm DWR
• Rib collar for ideal fit
• Smooth fabric in sleeves make it easy to pull on/off
• Two secure-zippered covered horizontal pockets and two open-angled hand pockets
• Rib finish sleeve cuff and bottom hem blocks the wind and cold

• 2.5 oz./yd_ (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 2.36 oz./yd_, 100% polyester
• StormShield water-resistant, DWR finish
• Easy to pack jacket into built-in packable pocket pouch
• Packable hood with hidden drawcords
• Zippered hand pockets
• Elastic cuffs

• 3.5 oz./yd_, 100% water-resistant polyurethane
• 190T 100% polyester taffeta lining
• Natural drawcord
• Hook-and-loop closure pockets at waist

• 100% Micron lightweight polyester
• Wind- and water-resistant
• Adjustable three-piece hood with eyelets and concealed cord locks
• Folds up into zippered front pocket
• Half-elastic cuffs
• Adjustable bottom hem with hidden shockcord closure in right pocket
• Holloway "H" logo on right sleeve

• 2.1 oz./yd_, 100% nylon taffeta
• 100% polyester brushed tricot lining
• Water resistant
• Snap front
• Raglan sleeves
• Reinforced front slash pockets
• Elastic cuffs
• Separate layers sewn at seams
• Open bottom
• Tear away label

• 100% nylon taslon shell with anti-pill microfleece lining
• Wind- and water-resistant
• Contrast tipped mock collar (except Black)
• Polyester raglan sleeve lining
• Full front-zip with inside zip guard
• InconspicuZip for easy embroidery
• Outside zip pockets

• 5.8 oz./yd_, 100% polyester
• Flexible lightweight fabric and collar
• Reflective tape
• Water-resistant

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 100% nylon
• Omni-SHIELD advanced repellency
• Omni-SHADE UPF 50 sun protection
• Elastic cuffs and hem
• Center front zipper
• Hand pockets with snap closure

• 3.4 oz./yd_/115 gsm (US), 5.7 oz./L yd (CA), Polyester microfiber twill
• 2.95oz. insulation in body and 1.7oz in sleeves
• Polyester brushed tricot lining in body
• Roll-away hood
• Brushed tricot-lined collar and chin guard
• Elasticized cuffs
• Storm flap with snap closure at bottom
• Centre front auto-lock zipper with reflective toggle
• Lower brushed tricot-lined concealed zippered pockets
• Thermal retention shock cord at hood and drop back hem
• Audio port access through inside left pocket
• Reflective piping at shoulder yoke and center back yoke

• 82 Gm, 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining 
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• 2.5 oz./yd_, 100% micro-polyester
• Lined with 100% polyester taffeta
• Water-resistant
• 1x1 rib-knit v-neck collar, cuffs and waistband
• Side seam pockets
• Woven label

• 100% nylon 33D with waterproof coating
• Nylon outer shell: level 3 waterproof coating
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000
• Classic fit
• No lining
• Self-neck tape
• Antique brass eyelets
• Antique brass 6 snap front closure (Black/ Black has black buttons)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at bottom opening
• Tear away label

• 8 oz./yd_, polyester softshell bonded to micro fleece
• Water-and wind-resistant
• 2" reflective tape
• Breathable
• Zippered front pockets

ANSI/ISEA 107-2015 Type R Class 3 Certified

• 2.1 oz./yd_, 100% nylon taffeta
• Water resistant
• Hood with drawcord
• Elastic cuffs
• Folds up into its own zippered front pocket
• Set in sleeves
• Open bottom

• 100% nylon taffeta
• Wind- and water-resistant
• Heather grey jersey lining (sunray yellow lined in White)
• Raglan sleeves with full elastic openings
• Front welt pockets
• InconspicuZip for easy embroidery access
• Snap center front opening
• Open-bottom hem finish

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Encased elastic cuffs
• Adjustable waist drawcord
• Front entry hidden pouch pocket
• Packs into mesh lined pouch pocket
• Champion "C" patch on left sleeve

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association