Page 5: Custom embroidered nylon outerwear

• 100% nylon taffeta
• Wind- and water-resistant
• Heather grey jersey lining (sunray yellow lined in White)
• Raglan sleeves with full elastic openings
• Front welt pockets
• InconspicuZip for easy embroidery access
• Snap center front opening
• Open-bottom hem finish

• 100% nylon taslon shell with anti-pill microfleece lining
• Wind- and water-resistant
• Contrast tipped mock collar (except Black)
• Polyester raglan sleeve lining
• Full front-zip with inside zip guard
• InconspicuZip for easy embroidery
• Outside zip pockets

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 100% nylon exterior shell
• 100% polyester lining, 60 gm hyper-loft poly fill insulation
• Wind- and water-resistant
• #5 reverse coil zippers at chest and pockets
• Packable pocket with #3 reverse coil zipper
• Capped elastic sleeve cuffs
• Locker loop at wearer's back neck
• Plastic cinche toggle at wearer's right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 8.9 oz/yd_., 100% polyester bonded sherpa
• 82/18 nylon/elastane stretch nylon
• Debossed Spyder neck tape
• Elastic cuff and hem binding
• Full-zip front closure
• Vertical-zippered chest pocket with stylized Spyder grommet
• Inseam pockets with rubber Spyder zip closure
• Internal draft flap
• Stylized front and back yoke seams
• Internal locker loop
• High-definition rubberized Spyder wordmark
• Raised silicone Spyder Bug patch

• Liner Jacket Lining: 100% polyester taffeta
• Shell: 3.5 oz./yd_ (US), 5.8 oz./L yd (CA), 100% nylon 228T taslan
• Lining:100% polyester mesh in upper body
• UTK 3 temperature range, 30F to -9F / -1C to -23C
• Storm flap with security zippered pocket
• Inside placket
• Thermal retention shockcord at waist, hem and hood
• Zip-off hood
• reflective piping along yoke
• adjustable cuffs with tabs
• EZEM system

• 100% nylon exterior shell
• 100% polyester lining, 60 gm hyper-loft poly fill insulation
• Wind- and water-resistant
• #5 reverse coil zippers at chest and pockets
• Packable into chest pocket with reverse coil zipper
• Capped elastic armhole binding
• Locker loop at wearer's back neck
• Plastic cinche toggle at wearer's right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Classic fit
• Unlined hood
• No lining
• Self-neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

• Body: 1 oz./yd_ (US), 1.7 oz./L yd (CA), 100% recycled nylon
• Lining: 100% polyester boucle sweater fleece in top, 100% polyester taffeta in sleeves & lower Body
• Insulation: 4.0 oz/yd_, 100% polyester UTK SubDown fill
• Water-repellent, water-resistant
• Storm placket with top and bottom snap closures
• Center front coil zipper with cord toggles
• Inside zippered security pocket
• Lower zippered pockets
• EZEMembroidery access

• 100% ripstop nylon shell
• 100% polyester fleece lining
• Polyurethane coating and DWR finish
• Drawcord hood with toggles
• Set-in sleeves with elastic cuffs
• Slash hand-warmer pockets and internal pocket
• Drawcord bottom
• Dickies logo at lower left hem

• Flame-resistant, 11 oz./yd_ (375 g/m_), 45% Rayon/ 40% Nylon/ 15% Aramid Double Brushed Fleece
• Single-ply hood with drawstring closure
• Zipper front
• Hemmed sleeves with elastic
• Elastic waist
• Two patch pockets
• Home Wash

Tall sizes available under style SMH6T

• 10 oz./yd_, 70/30 polyester/cotton quilted jersey
• Polyester fill
• Self-fabric collar
• Nylon placket with 4 metal snaps
• Nylon welt side pockets with hidden snap
• Tear away label

• 10 oz./yd_, 75/35 Cotton/polyester, Duck lining
• 1.9 oz./yd_, 100% Nylon bonded quilted to polyurethane, Taffeta bonded quilted to foam lining
• Industrial laundry, home wash

• 3.5 oz./yd_ (US), 5.8 oz./L yd (CA), 100% nylon taslan
• Contrast nylon dobby trim
• Polyester mesh lining in body, taffeta in sleeves
• Inner jacket:: 9 oz./yd_, 100% polyester fleece
• Polyester taffeta lining;
• UTK 3 temperature range:; 30F to -9F / -1C to -23C
• Zip-off or roll-away hood
• Inside placket
• Thermal retention shockcord at hood, waist and hem
• Zip-off or roll-away hood
• Matching nylon taslan pocket welts and waistband
• Storm flap with security zippered pocket

• 100% recycled nylon
• 79/21 recycled nylon/elastane inner fill
• Relaxed fit 
• Water-resistant finish
• Top shoulder panels with vertical quilt lines
• Stretch binding finish around armholes and at bottom opening
• Reverse coil zipper with 2-way puller
• Side pockets with brushed knit bags
• Sewn in label at back neck
• Sewn-in care and content label at lower left side seam
• Silicone logo patch at upper back under neck seam

• Fabric and garments are manufactured in a facility 100% powered by solar and wind energy. Fabric and garments are manufactured in a GreenCo certified facility. 450g of CO2 are saved with the production of each garment.

• 3 oz./yd_, polyester fill, 100% nylon with diamond quilt pattern
• 100% polyester taffeta lining
• Covered nylon zipper with metal logo pull
• Slight high low hem with side vents

• 5 oz/yd_ / 160 gsm (US), 8.4 oz/Lyd (CA), 75/25 nylon/spandex warp knit
• Moisture-management & antimicrobial
• Luxury, comfort and performance in one
• Center front reverse coil water-resistant zipper with rubber pull
• Print detail at back
• Welded hems to reduce bulk and chafing
• UV Protection 50+

• Body: 1 oz./yd_/39 gsm (US), 1.7 oz./L yd (CA), 100% nylon taslon
• 8.55 oz./yd insulation
• Polyester taffeta lining
• Water-repellant
• Center front coil zipper with semi-auto lock slider and toggle
• Double-access lower pockets with metal snap flap closure on top and side opening
• Shock cord at hem; EZEM System for embroidery access
• Tear away label

• 3.5 oz./yd_/120 gsm (US), 5.8 oz./L yd (CA), 100% polyester pongee with interior print
• 3,000 g breathability rating
• 3,000 mm waterproof rating
• Reflective piping details
• Roll away hood with shock cord
• Seam sealed with snap storm flap
• Adjustable cuffs and shock cord at hem for enhanced weather protection
• Center front coil zipper with nylon pull
• Zippered underarm vents for breathability
• Lower zippered pockets
• Packable style into self pocket bag
• Tear away label

• 3.5 oz./yd_, 100% nylon
• Weather resistant
• Polyester mesh lined packable hood
• Adjustable hood toggle
• Adjustable cuffs
• Branded front zipper and storm flap
• Welt hand pockets
• Waist and hem cinch-cord
• Back locker loop with Nautica branding
• Branded rubber patch on left sleeve
• Tagless label