Custom embroidered performance outerwear nylon

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind-and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Front entry hidden pouch pocket
• Encased elastic cuffs
• Adjustable waist drawcord
• Champion "C" patch on left sleeve
• Mesh lined packable storage bag

• 2.5 oz./yd_, 100% nylon 2L Full Dull plain weave
• 100% polyester fine-mesh lining
• Omni-Tech coated waterproof/breathable; fully seam sealed
• Attached, adjustable storm hood
• Abrasion-resistant chin guard
• Zippered hand pockets
• Adjustable cuffs
• Adjustable drawcord hem
• Reflective detail
• Packable into hand pocket

• Bonded Sherpa: 100% polyester, 300 grams
• Stretch Nylon: 82% nylon, 18% elastane
• Full-zip front closure
• Debossed Spyder neck tape & internal locker loop
• Internal draft flap
• Vertical-zippered chest pocket with stylized Spyder grommet
• Inseam pockets with rubber ?Spyder? zip closure
• Stylized front and back yoke seams
• High-definition rubberized Spyder wordmark
• Raised silicone Spyder Bug patch

• 100% Nylon
• Omni-Heat reflective lining 100% polyester
• Thermarator 100% polyester insulation
• Water resistant fabric
• Zippered hand and chest pockets
• Binding at cuffs

• 100% 380T coated nylon shell
• Polyester fill
• Classic fit
• Water- and wind-resistant
• Binding trim at cuffs and hem
• Exposed nylon zipper with pull tab at center front and collar
• Zippered welt pockets
• Folds and stows into separate neck pillow stored in collar

• Power Stretch: 57% nylon, 24% polyester, 19% elastane
• Custom Spyder knit jacquard 100% polyester
• Full-zip front closure
• Debossed Spyder neck tape & internal locker loop
• Collar with brushed tricot
• Secure-zip exterior chest pocket
• Strategically placed stretch panels for mobility
• Stylized back yoke
• Inseam pockets with zip closure
• High-definition rubberized Spyder wordmark
• Raised silicone Spyder Bug patch

• Textured nylon poplin 100% nylon
• 7 .37 oz./yd_, 100% polyester MTR filament fleece
• 1.10 oz./yd_, 100% polyester lightweight insulation
• Water resistant fabric
• Zippered hand and chest pockets
• Adjustable cuffs
• Partial elastic at hem

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 550 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Front side-entry zippered pockets
• Interior pockets
• Elastic windproof cuffs
• Folds and stows into separate pouch

• Bonded Sherpa: 100% polyester, 300 grams
• Stretch Nylon: 82% nylon, 18% elastane
• Full-zip front closure
• Debossed Spyder neck tape & internal locker loop
• Internal draft flap
• Vertical-zippered chest pocket with stylized Spyder grommet
• Inseam pockets with rubber ?Spyder? zip closure
• Stylized front and back yoke seams
• Elastic cuff and hem binding
• High-definition rubberized Spyder wordmark
• Raised silicone Spyder Bug patch

• 5 oz./yd_, 92/8 nylon/spandex shell
• Unlined
• Classic fit
• Water- and wind-resistant
• Exposed black nylon zipper with pull tab at center front
• Zippered welt pockets

• 3 oz./yd_ polyester fill, 100% 380T coated nylon shell
• Wind- and water-resistant
• Diamond quilted design
• Ribbed-knit collar, cuffs and waistband
• Nylon zipper with metal zipper pull
• Open welt pockets
• Folds and stows into separate pouch

• 85% nylon, 15% elastane
• Mesh: 100% polyester
• Exposed reverse-coil zipper, internal draft flap
• Tricot-lined collar for added comfort
• Debossed Spyder neck tape & internal locker loop
• Secure zip chest pocket
• Underarm vents, back dart for a better fit
• Stylized back yoke with mesh vent
• Secure zip front pockets with phone and coin sleeves
• Elastic cuffs and back hem for added mobility
• High-definition rubberized Spyder wordmark at left wrist

• Puffer: 82% nylon, 18% elastane matte finish, recycled imitation down fill
• Lining: 100% polyester
• Adjustable zip-off hood, exposed molded zipper, internal draft flap
• Debossed Spyder neck tape & internal locker loop
• Collar with brushed tricot, forward-set shoulder seams
• Underarm ventilation system
• Internal zippered chest pocket
• Two internal drop-in pockets, secure zip hand pockets
• Strategically placed internal stretch panels for mobility
• Stretch storm cuffs with thumb holes
• Adjustable, internal hem cinch-cord
• High-definition Spyder wordmark
• Raised silicone Spyder Bug patch

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 650 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Elastic windproof armholes
• Front pockets with side entry
• Interior pockets
• Folds and stows into separate pouch

• 2.1 oz./yd_, 100% nylon taffeta
• 100% polyester brushed tricot lining
• Water resistant
• Snap front
• Raglan sleeves
• Reinforced front slash pockets
• Elastic cuffs
  
• Open bottom
• Tear away label

• 3.04 oz./yd_, 100% nylon satin outer shell
• 100% polyester brushed tricot lining
• Water resistant
• Snap front
• Raglan sleeves
• Striped ribbed knit collar, cuffs and bottom band
• Reinforced slash front pockets
• Machine washable
• Woven label
• Individually polybagged 

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breathability/Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• DTM neck taping
• #5 DTM body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• 3 panel hood
• Scuba neck
• Round poly drawstring
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

"CLICK HERE to watch product video"

• 2.1 oz./yd_, 100% nylon taffeta
• Water resistant
• Hood with drawcord
• Elastic cuffs
• Folds up into its own zippered front pocket
• Set in sleeves
• Open bottom

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breath-ability/ Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• Standard fit
• Unlined hood
• No lining
• Self neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

"CLICK HERE to watch product video"