Page 5: Custom embroidered long sleeve sweatshirts hooded

• 7.5 oz./yd_, 80/20 cotton/polyester
• Full-cut 2-ply hood with matching drawcord
• Double-needle stitched seams
• Front pouch pocket
• Tear away label

• 10 oz./yd_, 75/25 ring-spun cotton/polyester blend 3-end fleece with 100% cotton face, 30 singles
• Heather colors are 52/48 cotton/polyester
• Unisex, slim fit
• Fleece lined hood
• Split stitch double-needle sewing on all seams
• Twill neck tape
• 1x1 jacquard ribbing at cuffs and waistband
• Gunmetal eyelets
• #5 YKK nylon kissing zipper
• Tear away label

• 9 oz./yd_, polyester sweatshirt material
• Black lower body and sleeves help keep a clean appearance
• Black ribbed-knit cuffs
• 2 wide high-performance reflective material
• Lower outside slash pockets

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 6 oz./yd_, 100% polyester
• Contrast raglan sleeves
• Front pouch pockets
• Overlock stitching detail
• Hemmed bottom & cuffs
• Nylon zipper
• Black drawcord

• 7.8 oz./yd_, 50/50 US grown cotton/polyester
• The polyester content is currently transitioning to CiCLO polyester
• Patented, low-pill, high-stitch density PrintPro XP fleece
• Double-ply hood, no drawcord for safety
• Pouch pocket
• Ribbed cuffs and waistband
• CPSIA tracking label compliant
• Transitioning to tear away label

This product meets the following Sustainable Style subcategories:

Sustainable Manufacturing: This product was made in a facility that is run by at least 50% renewable energy

Socially Conscious Manufacturing: This product was made in a facility that utilizes the Higg Index and has implemented Level 2 practices or above, and was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 7.5 oz./yd_, 70/30 ring-spun cotton/polyester blend French terry, 32 singles
• Black & Charcoal Heather are 55/45 cotton/polyester blend French terry
• Pre-laundered
• Unisex, slim fit
• Unlined hood
• Split stitch double-needle sewing
• 1x1 ribbing at cuffs, waistband, and side panels
• Antique nickel eyelets
• Two antique nickel tipped flat drawcords (natural contrast + one dyed-to-match)
• Natural-colored exposed zipper tape
• Media pocket and eyelet in front pocket
• Thumbholes at cuffs
• Twill neck tape
• V-notch
• Tear away label

• 7 oz./yd_, 55/45 cotton/polyester burnout fabric
• Acid washed with silicone finish
• Flatlock stitching throughout
• Dyed-to-match drawcord
• Antique brass concealed zipper
• Split-pouch pockets
• Raw-edge hood opening, pocket seams, cuffs, waistband, zipper placket and side seams

• 10.5 oz./yd_ (US), 17.5 oz./L y (CA), 75/25 cotton/recycled polyester, 18 singles
• Hammer Maxweight 2-end heavyweight fleece is a combination of style and functionality - made with recycled polyester and 100% cotton face ideal for decorating
• Classic fit
• 2-end heavyweight fleece with 100% cotton face
• 2 ply self-fabric hood with wide color matched flat cord
• Pouch pocket
• 1x1 rib at cuffs and waistband
• Tear away label

• Proud member of the U.S. Cotton Trust Protocol
• Made with OEKO-TEX certified low-impact dyes

• 8 oz./yd_, 50/50 cotton/polyester
• Double-lined hood
• Pouch pocket
• Double-needle stitching at waistband and cuffs
• Tear away label

• 6.3 oz./yd_, 89/11 recycled polyester/spandex
• Moisture-management properties
• 3-panel crossover hood
• Side seam pockets
• Set-in sleeves
• Self-fabric cuffs with thumbholes
• Self-fabric bottom hem
• Side vents
• Tagless label

This product meets the following Sustainable Style subcategory:

Sustainable Materials: Contains 89% recycled polyester

• 9 oz./yd_, 50/50 cotton/polyester smooth athletic fleece
• Self-lined hood
• Drawcord
• Pouch pocket
• Raglan sleeves
• Ribbed-knit cuffs and waistband
• Woven label

• 10 oz./yd_, 80/20 cotton/polyester fleece
• Double-needle stitched throughout
• Jersey lined hood with contrast trim around opening
• Split front placket with six metal eyelets and white drawcord
• Twill tape at back of neck
• Side seams
• Set-in pouch pocket
• 2x2 ribbed cuffs and waistband
• Contrast-color self-fabric sleeve panels
• Tear away label
• Interchangeable custom-color laces can be ordered separately (style 8831)

• 10 oz./yd_, 80/20 polyester/cotton water-resistant fleece body
• Gunmetal Heather is 100% polyester
• 100% polyester pique contrast panels
• 100% anti-pill polyester face 
• Classic fit
• Removable zip off hood with interior cadet collar
• 1x1 ribbing at cuffs and waistband
• Antique nickel eyelets with antique nickel tipped flat drawcord
• Coil exposed zipper
• Thumbholes at cuffs
• Media pocket & eyelet in front welt pocket
• Tear away label

• 6.3 oz./yd_, 89/11 recycled polyester/spandex
• Moisture wicking
• 3 panel hood
• Side seam pockets
• Set-in sleeves
• Self-fabric cuffs and bottom hem
• Tagless label

This product meets the following Sustainable Style subcategory:

Sustainable Materials: Contains 89% recycled polyester

• 8.5 oz./yd_, 80/20 cotton/polyester
• Classic fit
• Double-needle stitched throughout
• Double-lined hood
• Pouch pocket
• 1x1 ribbed cuffs and waistband with spandex
• Sewn in label

• 14 oz./yd_ total weight
• 8.5 oz./yd_, 80/20 cotton/polyester blend fleece exterior with 100% cotton face, 32 singles
• 5.5 oz./yd_, 100% polyester sherpa lined interior (the two fabrics, fleece and sherpa lining are NOT bonded together)
• Generous fit
• Split stitch double-needle sewing on all seams
• Twill neck tape
• 1x1 ribbing at cuffs & waistband
• Antique nickel eyelets
• Antique nickel exposed zipper
• Tear away label

• 9 oz./yd_ (US), 15 oz/L yd (CA), 80/20 ring-spun cotton/polyester blend with 100% cotton face, 30 singles
• Unisex, classic fit
• Jersey lined hood
• Split stitch double-needle sewing on all seams
• Twill neck tape
• 1x1 ribbing at cuffs and waistband
• Sewn eyelets
• Woven label

• 7.5 oz./yd_, 80/20 ring-spun USA cotton/polyester, 24 singles
• Heather Grey is 75/25 ring-spun cotton/polyester
• Other Heathers are 50/50 ring-spun cotton/polyester
• Solid colors are 100% cotton face
• Reactive-dyed for longer lasting color
• Jersey lined hood
• No drawcord
• Pouch pocket
• Ribbed cuffs and waistband with 5% spandex
• Tear away label
• USMCA certified

Solid color (80/20) cotton poly, 100% cotton face garments have a soft and cozy feel on the inside with a printer-friendly surface on the exterior - ready for anything and great for DTG and Sublimation.

• 100% polyester moisture-management fleece
• Sublimated digital side, sleeve panels & hood liner
• Pouch pocket with two hook-and-loop closures at top of pockets with headset opening
• Self-fabric cuffs & waistband
• Embroidered Badger logo on left sleeve