Page 2: Custom embroidered custom safety

• 5.5-ounce 100% polyester smooth-faced fleece
• Moisture-wicking
• Black bottom front and lower sleeves for a cleaner appearance
• Three-panel hood with drawcord adjustable closure
• Taped neck
• Front pouch pocket

• ANSI/ISEA 107 Class 2 certified
• 5.9-ounce 100% polyester interlock
• Wicks moisture
• 2-in. wide reflective taping on front and back
• Left chest pocket for pens and notes

• 9 oz. polyester sweatshirt material
• Black lower body and sleeves help the wearer keep a clean appearance
• Black rib knit cuffing
• 2 wide high performance reflective material
• Lower outside slash pockets
• Black plastic zipper
• Lime (JS102), Orange (JS103) 

• 7.25 oz./yd_, Twill
• Shell: 65% Polyester/35% Cotton 
• Lining: 100% Polyester 
• Insulation: 100% Polyester 
• Pre-cure durable press
• Solid brass zipper
• Two-piece, topstitched, with sewn-in stays
• Two lower inset on-seam pockets and utility pocket on left sleeve

*Insulation content may vary

• 8.6-ounce 100% polyester smooth-faced fleece
• Black bottom front and cuffs for a cleaner appearance
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
• Three-panel hood with drawcord closure
• Taped neck
• Front pouch pockets
• Molded center front zippered closure
• Rib knit cuffs and hem

• 4.72 oz., 300D durable waterproof seam sealed shell with thermal insulation
• 2 wide reflective material
• Hidden collar hood
• Black bottom front & sleeves to keep a clean appearance
• Larger radio pocket on left chest
• Two outside slash pockets
• Right chest outside access multi-use pocket with vertical zipper closure
• Lime (JS121), Orange (JS122) 

• 4.42 oz., 300-denier durable ripstop material with waterproof seam sealed construction
• Removable black quilted liner
• Hidden collar hood
• 2 wide 3M Scotchlite reflective material with 3 contrast
• Brilliant Series reflective piping on collar, shoulders, hood and sleeve seams
• Adjustable cuffs
• Black bottom front & sleeves to keep a clean appearance
• Left chest pocket with retractable clear ID holder
• Left bicep 2-division pencil/pen pocket
• Two outside lower slash pockets with zippers
• Inside wallet pocket

• 100% polyester
• Structured, six-panel, mid-profile
• Pre-curved visor, brown undervisor
• Hook-and-loop closure

• 8.5 oz./yd_, Polyester fleece
• Black high quality heavyweight polyester sweatshirt material
• Black rib knit cuffing
• 2" wide breathable reflective material with 3 1/2" lime contrast
• Zipper front closure
• Lower outside slash pockets
• Black/ Lime (B310), Royal Blue/ Lime (B312), Red/ Lime (B313)
  

ANSI 107 Type O, Class 1 Compliant

"CLICK HERE to watch product video"

Shown in the product video the B310-313 zips into the B300-303, the enhanced visibility jacket B300-303 is sold separately

• 100% polyester woven shell with durable water-repellent (DWR) finish bonded to a water-resistant breathable film insert and a 100% polyester microfleece lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fabric breathability rating: 5000G/M2
• Full-length interior storm flap with chin guard
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves; tape is bonded to fabric
• Molded right chest hand and center front zippers with rubber pulls
• Mic clips at shoulders
• Elastic cuffs with adjustable hook and loop closures and rubber tabs
• Adjustable drawcord hem

• 9 oz./yd_, polyester sweatshirt material
• Black lower body and sleeves help keep a clean appearance
• Black rib knit cuffing
• 2 wide high performance reflective material
• Lower outside slash pockets

• 8 oz./yd_, 55/45 cotton/polyester fleece
• Classic fit
• 2-ply cotton gaiter sewn into neck seam with lycra binding at edge
• Jersey lined hood
• Matching drawcord
• Pouch pocket

• 100% polyester lining
• Black bottom front and lower sleeves for a cleaner appearance
• Shell's fabric waterproof rating: 5000MM
• Fully seam-sealed shell
• Adjustable rain hood
• Durable reflective 2-inch tape meets ANSI 107 requirements
• Full-length interior and exterior storm flaps
• Vented cape back
• Right chest pocket and retractable ID holder
• Two lower front pockets
• Center front zippered pocket to hold a tablet
• Gusseted cuffs
• Elastic hem
• Decoration access pocket in shell
• Non-ANSI 8.6-ounce 100% polyester inner full-zip hoodie
• Hoodie can be attached inside shell

• ANSI/ISEA 107 Class 3 certified
• Water resistant 100% PU shell 100% polyester backing
• 8000MM fabric waterproof rating
• Snap-off hood with drawcord and toggle for adjustability
• Two-way black Vislon zipper
• Internal storm flap
• Half-elastic adjustable tab cuffs with hook and loop closures
• 2-in. wide reflective taping on front back and sleeves
• Two welt pockets
• Drawcord hem with toggle adjustability
• This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

• 8.55 oz (290gsm)., High quality polyester sweatshirt material with black and lime rib knit cuffs
• Stay in sight with 2 wide high performance breathable reflective material
• Black accents add contrast, style and durability
• Reflective piping accents add better visibility in low light conditions
• Hood is lined with soft jersey mesh for optimum comfort
• Lower outside slash pockets
• Designed to zip into B300 & JS135 jackets for added warmth (sold separately)

• 5.2-ounce 100% polyfill insulation box diamond quilted body and sleeve lining
• Black bottom front and lower sleeves for a cleaner appearance
• Fabric waterproof rating: 5000MM
• Fully seam-sealed
• Adjustable zip-removable rain hood with hook and loop closure and toggles
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility
• Full-length exterior storm flap
• Left chest bellows pocket
• Two open lower front pockets
• Molded center front zippered closure
• Elastic cuffs
• Elastic hem
• Decoration access pocket

• 7.25 oz./yd_, Twill
• Shell: 65% Polyester/ 35% Cotton 
• Lining: 100% Polyester 
• Insulation: 100% Polyester 
• Pre-cure durable press
• Solid brass zipper
• Two-piece, topstitched, with sewn-in stays
• Two lower inset on-seam pockets and utility pocket on left sleeve
• 31 1/4 hip length (LT-XLT)
• 32 1/4" hip length (2XLT)
• Standard sizes available under style JT50EN

*Insulation content may vary

• 9.1 oz., 150D polyester oxford with PU coating
• Waterproof material with durable seam sealed construction
• 2 wide reflective material
• Zipper/storm flap closure
• Non-sparking snaps and zipper
• Adjustable wrist cuffs
• Hidden collar hood
• Lower front patch pockets with flaps
• Adjustable leg cuff straps
• Lime (RW110), Orange (RW111) 

• 150D polyester oxford with PU coating
• Waterproof material with durable seam sealed construction
• 2 wide high performance reflective material
• Zipper/storm flap closure for weather protection
• Non-sparking snaps and zipper
• Adjustable wrist cuffs
• Mesh liner
• Hidden collar hood
• Lower front patch pockets with snap closure
• Left chest radio pocket
• Lime (RWJ102), Orange (RWJ103).

"CLICK HERE to watch product video"

• Waterproof material with durable seam sealed construction
• 2 wide high performance reflective material
• Zipper/storm flap closure
• Non-sparking snaps and zipper
• Fully vented cape back for breathability
• Adjustable wrist cuffs
• Mesh liner
• Hidden collar hood
• D-ring access on back
• Patch pockets with snap closure