Page 8: Custom embroidered unisex outerwear

• 100% polyester
• Lining is 100% polyester with Omni-Heat thermal reflective 
• Omni-Tech waterproof/breathable fully seam sealed
• Regular fit
• Drawcord adjustable hood
• Adjustable cuffs
• Drawcord-adjustable hem
• Zippered chest and hand pockets
• Droptail hem
• Columbia branding above chest pocket
• Omni-Heat branding on left sleeve hem
• Woven label

• 100% polyester
• Lining is 100% polyester with Omni-Heat thermal reflective
• 100% recycled polyester Thermarator insulation
• Omni-Shield water and stain repellent
• Water resistant fabric
• Active fit
• Chin guard
• Drawcord adjustable hem and elastic cuffs with binding
• Zippered hand pockets
• Columbia branding on upper left sleeve
• Omni-Heat branding on left sleeve hem
• Woven label

• 8 oz./yd, polyester softshell bonded to micro fleece
• Water and wind resistant
• 2" reflective tape
• ANSI/ISEA 107-2015 Type R Class 3 Certified

• 4 oz./yd., 100% polyester mesh
• Shorter length design
• Nylon front zipper
• 2" reflective tape
• Chest pocket
• Adjustable snaps on side seams
• ANSI/SEA 107-2015 Type R Class 2 Certified
  

• 6.2 oz., modacrylic flame-resistant mesh material
• 2" wide breathable reflective material
• FR hook-and-loop front closure
• Two lower inside patch pockets
• Left chest inside two-tier, four-division pocket

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 4.2 oz/yd., 55/45 polyester/recycled polyester
• 2.1 oz/yd., 100% recycled polyester fill
• 1.7 oz/yd., 100% polyester lining
• Three-piece visored hood cinches tight to seal out sleet and wind
• Collar with brushed tricot
• Debossed spyder neck tape
• Adjustable cuff tabs with interior stretch cuffs and thumb holes
• Reverse coil center front zip with internal draft flap
• Two hand warmer chest pockets, roomy zippered double entry patch pockets
• Two interior mesh pockets
• Adjustable, internal hem cinch-cord
• Targeted internal stretch panels
• Internal locker loop
  
• High-definition Spyder wordmark & Spyder Bug

• Ultra-Cool 100% polyester mesh material
• Brilliant Trim reflective edging improves low light visibility
• Hook-and-loop front closure reinforced with durable webbing
• 5-point breakaway on shoulders, sides, and front closure
• 2" wide high performance reflective material on 3" contrasting color
• Left and right chest mic tabs
• Two lapel grommets
• Outside right chest 2-tier, 4-division pocket
• Outside left chest multi-use cell pocket
• Inside lower patch pockets
• Two lower outside cargo pockets with adjustable flaps and grommets

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 12 oz./yd, garment-washed 100% cotton quarry-washed Boulder Cloth canvas
• Soft plaid blanket lining
• Snap cuffs for easy access
• Inside pocket with snap closure
• Adjustable tab waistband
• Triple-needle stitching throughout for long wear
• Heavy-duty metal zipper featuring DRI DUCK puller

• 12 oz./yd, 100% cotton quarry-washed Boulder Cloth canvas
• Textured thermal lining
• Three-piece hood
• Zippered chest pocket
• DRI DUCK heavy-duty metal zipper
• Articulated elbows
• Inside patch pockets with snap closure
• Open bottom with canvas facing droptail hem

• Modacrylic blend Flame Resistant GlenGuard mesh material
• 2 wide high performance breathable reflective material greatly reduces hot spots
• Indura FR black bottom and trim helps keep the vest clean and enhance workers appearance
• Nomex high temp FR zipper
• FR reflective piping.
• Optional D-Ring access also available
• Two lower inside patch pockets
• Left chest inside 2-tier, 4-division pencil pocket

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Ultra-Cool100% polyester mesh with heavy duty solid bottom
• Zipper front closure reinforced with durable webbing
• 2 wide high performance reflective material with 3.25 black mesh contrast
• Patented Brilliant Plus Reflective material greatly enhances worker visibility during low light and nighttime hours
• Brilliant Trim reflective edging improves low light visibility and provides instant differentiation between you and the work zone
• Left chest mic tab
• Left chest radio pocket with retractable clear ID holder
• Right chest 2-tier, 4-division pocket
• Two lower front patch pockets
• Inside lower left tablet (iPad) pocket with load bearing strap

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 3 oz./yd, PVC/Modacrylic Knit, Water-Repellent
• Non-conductive durable hardware
• 1 1/2" reflective striping
• Two patch pockets with flaps
• Vented back with "D" ring access
• Take-up tabs on cuff
• Hand or machine wash gentle cycle. Use mild soap. Line Dry

• 9 oz./yd, 80/20 ring-spun cotton/polyester, 32 singles
• 100% cotton face yarn
• Split stitch double needle sewing
• Twill neck tape
• 1x1 ribbing at cuffs & waistband
• Exposed zipper
• Woven label

• 82/18 nylon/elastane matte finish, recycled imitation down fill
• 100% polyester lining
• Strategically placed internal stretch panels for mobility
• Adjustable zip-off hood
• Collar with brushed tricot
• Debossed Spyder neck tape
  
• Forward-set shoulder seams
• Stretch storm cuffs with thumb holes
• Underarm ventilation system
• Exposed molded zipper
• Internal zippered chest pocket
• Two internal drop-in pockets, secure zip hand pockets
• Internal draft flap
• Adjustable, internal hem cinch-cord
• Internal locker loop
• High-definition Spyder wordmark
• Raised silicone Spyder Bug patch

• 2 wide ORALITE prismatic tape performs exceptionally well under wet conditions and provides additional durability compared to silver glass beaded reflective material
• Reflective piping accents add better visibility in low light
• Durable ripstop material with waterproof seam sealed construction
• Tall collar designed with asymmetrical zipper to avoid chafing
• 6 side zipper for added comfort when sitting and provides improved airflow
• Thermal insulation
• Adjustable cuffs
• Black lower body and sleeves help the wearer keep a clean appearance
• Storm cuff (powder barrier) waist liner keeps wind and snow out of critical areas
• Two outside lower inset pockets with zippers
• Hidden left chest pocket
• Left forearm zipper pocket with microfiber wipe for cleaning safety glasses
• Inside lower left hidden tablet (iPad) pocket with zipper

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

"CLICK HERE to watch product video"

• Modacrylic blend Flame Resistant solid material
• FR hook-and-loop front closure
• 2 wide laminated reflective material
• Two lower inside patch pockets
• One inside left chest 2-tier, 4-division pencil pocket
• Made in USA

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Shell: EXCEL FR Flame-resistant, 9 oz./yd, Twill 100% Cotton, Water-Repellent
• Lining: 100% Cotton
• Insulation Package: 12 oz./yd, 100% Modacrylic
• Separating, heavy-duty, Nomex taped brass zipper
• Rib-knit collar, cuff and waistband
• Two large inset, welted-slash pockets
• Left sleeve pocket
• Industrial Laundry - Heavy Soil, Industrial Laundry - Light Soil, Home Wash

Tall sizes available in style JET2T

• Heavy duty poly/cotton solid front with mesh back
• Oversized zipper front closure with durable webbing reinforcement
• 2" wide high performance reflective material with 3" high visibility contrasting lime
• Left and right mic tabs
• Padded neck for comfort
• 2 lapel grommets
• Left chest 2-tier pocket with dual function flap that can be held open by hook-and-loop
• Large right chest gusseted pocket with flap
• Outside lower front gusseted pockets with flaps, left elastic spray can pocket
• Inside lower right full length zipper pockets with load bearing strap
• Inside lower left tablet pocket with load bearing strap
• Hidden back pouch with left and right zipper access
• Inside left chest phone pocket

NON-ANSI/ISEA

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• Solid polyester front with mesh back
• Heavy duty black bottom to help keep a clean appearance
• Zipper front closure reinforced with durable webbing
• 2 wide high-performance reflective material with 2.5 contrasting black panels
• Reinforced left and right mic tabs
• Padded neck for extra comfort
• 2 lapel grommets
• 7 anchor points certified to tether 25lbs each with a maximum tether length of 54
• D-ring access and side slits for ease of movement.
• Black reflective trim
• Large left chest gusseted pocket with dual-function flap that can be held open by hook & loop
• Retractable clear ID holder and an anchor point.
• Right chest 2-division pocket with D-rings
• Lower full length multi-function pockets that can be held open by hook-and-loop including reinforced anchor points for tool tethers
• Hidden back pouch pocket with left and right zipper access
• Internal double layer pockets with load bearing straps

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 2

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.