Page 3: Custom embroidered rain outerwear

• 100% polyurethane bonded to a woven backing (3.98 oz./yd²)
• Wind & waterproof with heat sealed seams for weather protection
• Lined with grey mesh in body & front yoke and underarm vents to allow for air-flow circulation
• 2-way zipper for freedom of movement and a full length wind flap for protection from the elements
• 3M Reflective strip across back provides high visibility (only on Black, Red, True Navy, & Grey)
• Covered zipper pockets for protecting valuables
• Hood with adjustable shockcord drawstring
• Adjustable tab cuffs with hook & loop closure
• Open hem with adjustable shockcord drawstring
• The nature of this product makes it sensitive to fading with prolonged exposure to sunlight
• Jackets should remain in polybags until ready to wear or decorate in order to protect the integrity of the product

• 100% polyester shell
• 100% polyester mesh body and hood lining
• 100% polyester woven sleeve lining
• Tag-free label
• Three-panel hood with drawcord and toggles
• Angled chin guard for additional comfort
• Exposed molded zipper
• Front slash pockets
• Half elastic half self-fabric cuffs for comfort
• Decoration access pocket
• Slight drop tail hem

• Waterproof material with durable seam sealed construction
• Black bottom and accents for a mix of functionality and style
• Brilliant Series reflective piping improves reflectivity all the way around the garment
• 2" wide Oralite reflective material performs exceptionally well under wet conditions
• Waterproof front zipper
• Adjustable wrist cuffs 
• Ventilated back and armpits
• Removable rain hood with snaps on collar
• Hidden left chest pocket with zipper and retractable clear ID holder
• Two outside lower slash pockets with waterproof zipper
• Inside lower left hidden tablet (iPad) pocket with zipper

ANSI/ISEA 107 2015 / ANSI/ISEA 107 2020 Type R Class 3

Fabric dye lot variances may occur and meet luminance factor as stated in the standard.

• 100% polyester oxford with water-resistant finish
• Black bottom front and lower sleeves for a cleaner appearance
• Fully seam sealed
• 3-panel hood that stows in collar
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
• Full-length exterior storm flap with snap closure
• Adjustable cuffs with hook and loop closures
• Two lower front pockets with flaps
• Adjustable drawcord hem

• 100% polyurethane with a fun printed nylon taffeta lining (3.98 oz./yd²)
• Wind & waterproof with heat sealed seams for weather protection
• Printed Plaid and striped taffeta lining for a high fashion feel
• 2-way zipper for freedom of movement and a full length wind flap for protection from the elements
• 3M reflective trims across the front and back for visibility.
• Flattering A-line design
• The nature of this product makes it sensitive to fading with prolonged exposure to sunlight
• Jackets should remain in polybags until ready to wear or decorate in order to protect the integrity of the product

• 8.7 oz/yd_ / 295 gsm (US), 14.5 oz/Lyd (CA), 86/14 polyester/spandex jersey
• Moisture-management properties
• Luxury, comfort and performance in one
• UV protection performance
• Center front coil zipper with decorative grosgrain zipper pull
• Raglan sleeve

• 100% polyester
• C0 durable water repellent fabric 10k 3k waterproof 
• Storm flap zipper cover
• Side seam hand pockets 

• 1 oz./yd_ (US), 1.7 oz./L yd (CA), 100 recycled nylon
• Water-repellent
• Three-piece Shockcord hood with brim detail
• Self-fabric chin guard
• Partial encased elastic cuffs
• Contrast center front reverse coil zipper with auto lock slider and toggle
• Lower zippered pockets with zipper garages
• Packable style into self-pocket bag
• Shockcord at hem

• 100% River Bank taslan nylon (3.69 oz/yd²)
• Waterproof 3000MM WP / 3000MM Breathability
• Full zip hooded jacket
• Storm flap for protection from the elements
• Fully lined with brushed tricot for added warmth
• Polyester sleeve lining for easy on/off
• Front zip pockets lined with tricot for added warmth
• Zippered interior pocket
• Color blocked styling
• ESA (Embroidery Stow-Away) for easy decorating access
• Adjustable shock-cord hem

• 100% polyester shell and lining
• 7.4-ounce 100% polyester fleece zip-in inner jacket
• Removable adjustable 3-panel hood with locking drawcords
• Molded center front 2-way zipper
• Shaped exterior storm flap with snap closure
• Interior storm flap and chin guard
• Port Pocket for decorationA A access
• Articulated elbows
• Adjustable cuffs with hook and loop closures
• Adjustable hem with locking drawcord
• Inner jacket: molded center front zipper zippered hand pockets binding at hem and cuffs
• Outer shell fabric waterproof rating: 3000MM
• Outer shell fabric breathability rating: 1000G/M2
• Outer shell water protection method: water-resistant finish

• 100% polyester MTR filament fleece, 250g
• Zippered pockets
• Columbia woven patch logo on back yoke

• 100% polyester polyurethane (3.98/yd²)
• A-line design with taffeta nylon in sleeves for easy on/off
• Wind & waterproof with heat sealed seams for weather protection
• Lined with black mesh in body & front yoke, and underarm vents to allow for air-flow circulation
• Two-way zipper for freedom of movement and full-length wind flap for protection from the elements
• Black trim detail for added contrast on front and back
• Covered zipper pockets for protecting valuables
• ESA (Embroidery Stow-Away) for easy decorating access
• NEW COLOR: 700 Black Leopard Print

• 100% PU-coated polyester
• 100% polyester mesh-lined body and hood
• 100% polyester-lined sleeves
• 1500MM fabric waterproof rating
• Attached hood with adjustable locking drawcord
• Molded zipper
• Grommets for breathability under arms
• Longer length with adjustable locking drawcord waist
• Adjustable self-fabric tab cuffs with hook and loop closures and reflective detail
• Front zippered pockets with reflective detail
• Port Pocket for decoration access
• Open hem with adjustable locking drawcord

• 3.5 oz./yd_, 100% nylon
• Weather resistant
• Polyester mesh lined packable hood
• Adjustable hood toggle
• Adjustable cuffs
• Branded front zipper and storm flap
• Welt hand pockets
• Waist and hem cinch-cord
• Back locker loop with Nautica branding
• Branded rubber patch on left sleeve
• Tagless label

• 100% River Bank taslan nylon (3.69 oz/yd²)
• Waterproof 3000MM WP / 3000MM Breathability
• Full zip hooded jacket
• Storm flap for protection from the elements
• Fully lined with brushed tricot for added warmth
• Polyester sleeve lining for easy on/off
• Front zip pockets lined with tricot for added warmth
• Zippered interior pocket
• Color blocked styling
• ESA (Embroidery Stow-Away) for easy decorating access
• Adjustable shock-cord hem

• 100% polyester shell
• 100% nylon zip-in inner jacket with 3-ounce polyfill
• 3000MM fabric waterproof rating
• 3000G/M2 fabric breathability rating
• Detachable hood with locking drawcord
• Full-length interior storm flap
• Chin guard
• Contrast zippered chest and sleeve pockets
• Front zippered pockets
• Adjustable tab cuffs with hook and loop closures
• Port Pocket for decoration access
• Shell has an open hem

• 4.2 oz/yd_., 55/45 polyester/recycled polyester
• 2.1 oz/yd_., 100% recycled polyester fill
• 1.7 oz/yd_., 100% polyester lining
• Three-piece visored hood cinches tight to seal out sleet and wind
• Debossed spyder neck tape
• Collar with brushed tricot
• Targeted internal stretch panels
• Adjustable cuff tabs with interior stretch cuffs and thumb holes
• Storm flap with snap closure covers center front zip
• Two hand warmer chest pockets with concealed snaps, zippered lower pockets with snap flap
• Two interior mesh pockets
• Drop-tail hem and back vent
• Internal locker loop
  
• High-definition Spyder wordmark & Spyder Bug

• 3.5 oz./yd_/120 gsm (US), 5.8 oz./L yd (CA), 100% polyester pongee with interior print
• 3,000 g breathability rating
• 3,000 mm waterproof rating
• Reflective piping details
• Roll away hood with shock cord
• Seam sealed with snap storm flap
• Adjustable cuffs and shock cord at hem for enhanced weather protection
• Center front coil zipper with nylon pull
• Zippered underarm vents for breathability
• Lower zippered pockets
• Packable style into self pocket bag
• Tear away label

• 100% polyurethane bonded to a woven backing (3.98 oz./yd²)
• A-line design with taffeta nylon in sleeves for easy on/off
• Wind & waterproof with heat sealed seams for weather protection
• Lined with grey mesh in body & front yoke and underarm vents to allow for air-flow circulation
• Front vented capes for breathability and easy decorating access
• 2-way zipper for freedom of movement and full length wind flap for protection from the elements
• 3M Reflective trims across front & back provide high visibility
• Covered zipper pockets for protecting valuables
• Hood with adjustable shockcord drawstring
• Adjustable tab cuffs with hook & loop closure
• Open hem with adjustable shockcord drawstring
• The nature of this product makes it sensitive to fading with prolonged exposure to sunlight
• Jackets should remain in polybags until ready to wear or decorate in order to protect the integrity of the product

• 100% polyurethane bonded to a woven backing (3.98 oz./yd²)
• A-line design with taffeta nylon in sleeves for easy on/off
• Wind & waterproof with heat sealed seams for weather protection
• Lined with grey mesh in body & front yoke and underarm vents to allow for air-flow circulation
• 2-way zipper for freedom of movement and full length wind flap for protection from the elements
• 3M Reflective trims across front & back provide high visibility
• Covered zipper pockets for protecting valuables
• ESA (Embroidery Stow-Away) for easy decorating access
• The nature of this product makes it sensitive to fading with prolonged exposure to sunlight
• Jackets should remain in polybags until ready to wear or decorate in order to protect the integrity of the product