Custom embroidered performance outerwear fashion gray

• 2.5 oz./yd_ (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 7.4 oz./yd_ (US) 12.3 oz./L yd (CA), 100% polyester MTR filament fleece
• Zippered hand pockets

• 7.4 oz./yd_ (US) 12.3 oz./L yd (CA), 100% polyester MTR filament fleece
• Modern classic fit
• Quarter zip
• Interior drawcord in bottom hem
• No pockets

• 8 oz./yd_ (US), 13.4 oz/L yd (CA), 100% recycled polyester
• Waffle textured shoulder panels and back
• Two front zipper pockets
• Open hem cuffs and bottom hem
• Contrast adidas logo on right sleeve

• 2.5 oz./yd_, 100% nylon 2L Full Dull plain weave
• 100% polyester fine-mesh lining
• Omni-Tech coated waterproof/breathable; fully seam sealed
• Attached, adjustable storm hood
• Abrasion-resistant chin guard
• Zippered hand pockets
• Adjustable cuffs
• Adjustable drawcord hem
• Reflective detail
• Packable into hand pocket

• 100% 380T coated nylon shell
• Polyester fill
• Classic fit
• Water- and wind-resistant
• Binding trim at cuffs and hem
• Exposed nylon zipper with pull tab at center front and collar
• Zippered welt pockets
• Folds and stows into separate neck pillow stored in collar

• 7.4 oz./yd_, 100% polyester MTR filament fleece
• Zippered hand pockets

• 100% polyester contour softshell
• Wind- and water-resistant
• Abrasion-resistant chin guard
• Zippered hand and chest pockets
• Adjustable cuff tabs
• Adjustable drawcord hem

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 550 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Front side-entry zippered pockets
• Interior pockets
• Elastic windproof cuffs
• Folds and stows into separate pouch

• 5 oz./yd_, 92/8 nylon/spandex shell
• Unlined
• Classic fit
• Water- and wind-resistant
• Exposed black nylon zipper with pull tab at center front
• Zippered welt pockets

• 3 oz./yd_ polyester fill, 100% 380T coated nylon shell
• Wind- and water-resistant
• Diamond quilted design
• Ribbed-knit collar, cuffs and waistband
• Nylon zipper with metal zipper pull
• Open welt pockets
• Folds and stows into separate pouch

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 650 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Elastic windproof armholes
• Front pockets with side entry
• Interior pockets
• Folds and stows into separate pouch

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breathability/Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• DTM neck taping
• #5 DTM body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• 3 panel hood
• Scuba neck
• Round poly drawstring
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

"CLICK HERE to watch product video"

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breath-ability/ Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• Standard fit
• Unlined hood
• No lining
• Self neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

"CLICK HERE to watch product video"

• 2.9 oz./yd_ (US) 4,83 oz./L yd (CA),100% polyester fabric with interior water resistant coating
• 100% Polyester 1x1 Ribbing
• Waterproof Pressure Resistance: 600 mm
• Single layer, no lining 
• Matte Plastic #5 Zipper
• Self Neck Tape
• Welt Pockets
• Locker loop in center back
• Tear away label

• 7.4 oz./yd_ (US) 12.3 oz./L yd  (CA), 100% polyester MTR filament fleece
• Zippered hand pockets
• Interior drawcord

• 8 oz./yd_ (US), 13.4 oz/L yd (CA), 100% recycled polyester
• Waffle textured shoulder panels and back
• Two front zipper pockets
• Open hem cuffs and bottom hem
• Contrast adidas logo on right sleeve

• 6.5 oz./yd_,100% polyester fleece
• Regular fit
• Two stripes down raglan sleeves
• 1x1 ribbing at cuffs & waistband
• Coil kissing zipper
• Twill neck tape
• Media pocket and eyelet
• Tear away label

• 3 oz./yd_ polyester fill, 100% 380T coated nylon shell
• Wind- and water-resistant
• Diamond quilted design
• Ribbed-knit collar, cuffs and waistband
• Nylon zipper with metal zipper pull
• Open welt pockets
• Folds and stows into separate pouch

• 7.4 oz./yd_, 100% polyester MTR filament fleece
• Zippered hand pockets