Custom embroidered hooded outerwear fashion gray custom

• 6.5 oz./yd_, 52/48 cotton/polyester blend, 32 singles
• Raglan sleeves
• Unlined hood
• Reverse coverstitch sewing
• Twill neck tape
• 1x1 ribbing at cuff, and waistband
• Tear away label

• 3 oz./yd_ (US), 5 oz/L yd (CA), 100% recycled polyester
• Full front zipper
• Two front zipper pockets
• Elastic cuffs
• Contrast 3-stripes on sleeves

• 6.5 oz./yd_, 66/21/13 polyester/cotton/rayon lining
• Water-resistant
• 100% polyester shell
• Interior zippered pocket
• Lining Saver System

• 8.2 oz./yd_ (US) 13.4 oz./L yd (CA), 50/38/12 polyester/airlume combed and ringspun cotton/rayon pre-laundered, 32 singles
• Retail fit
  
• Unisex sizing
• Split-pouch pocket
• Rib cuffs and waistband
  
• Side seams
• Tear away label

"CLICK HERE for fabric guide & screen printing tips"

• 2.5 oz./yd_ (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 2.5 oz./yd_, 100% nylon 2L Full Dull plain weave
• 100% polyester fine-mesh lining
• Omni-Tech coated waterproof/breathable; fully seam sealed
• Attached, adjustable storm hood
• Abrasion-resistant chin guard
• Zippered hand pockets
• Adjustable cuffs
• Adjustable drawcord hem
• Reflective detail
• Packable into hand pocket

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breathability/Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• DTM neck taping
• #5 DTM body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• 3 panel hood
• Scuba neck
• Round poly drawstring
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

"CLICK HERE to watch product video"

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breath-ability/ Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• Standard fit
• Unlined hood
• No lining
• Self neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

"CLICK HERE to watch product video"

• 13.8 oz., 300 gm 100% waterproof polyester shell bonded to 160gm micro fleece lining.
• Waterproof Coating: 20,000 mm
• Inner PU Coating: Breath-ability/Permeability = 5,000
• 3 panel scuba hood
• #5 water resistant zippers
• Zippered left chest pocket and welt pockets
• Media pocket
• Toggles at hood and bottom side seams
• Antique nickel eyelets
• Concealed embroidery access for embellishing
• Tear away label

"CLICK HERE to watch product video"

• 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• Matte finish #4 reverse coil zipper
• Single layer body with fine mesh hood liner
• Three panel hood & scuba neck
• Welt pockets with mesh pocket bags
• Elastic cuffs and waistband
• Self neck tape with locker loop in center back
• Tear away label

• 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• Matte finish eyelets and zippers
• #4 zipper with zipper pull
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 7 oz./yd_, 55/45 cotton/polyester reverse fleece
• Classic fit
• Drawcord
• Pouch pocket
• Ribbed-knit cuffs and waistband

• 6.5 oz./yd_, 52/48 cotton/polyester blend, 32 singles
• Raglan sleeves
• Unlined hood
• Split stitch double needle sewing
• Twill neck tape
• #3 dtm coil kissing zipper with nickel pull
• 1x1 ribbing at cuff, and waistband
• Tear away label