Page 2: Custom embroidered fashion outerwear

• 7.4 oz./yd_, 100% polyester MTR filament fleece
• Zippered hand pockets

• Textured nylon poplin 100% nylon
• 7 .37 oz./yd_, 100% polyester MTR filament fleece
• 1.10 oz./yd_, 100% polyester lightweight insulation
• Water resistant fabric
• Zippered hand and chest pockets
• Adjustable cuffs
• Partial elastic at hem

• 9.5 oz./yd_
• High loft polyester sherpa
• Quarter-zip placket and self-fabric collar
• Set-in sleeves and side seam waist vents

• 100% 380T coated nylon shell
• Polyester fill
• Classic fit
• Water- and wind-resistant
• Binding trim at cuffs and hem
• Exposed nylon zipper with pull tab at center front and collar
• Zippered welt pockets
• Folds and stows into separate neck pillow stored in collar

• 100% polyester
• Zippered chest pocket 
• Abrasion resistant trim detail

• 8.9 oz./yd? / 300 gsm, 100% cotton jersey knit, 9 gauge
• 1x1 rib at center front placket
• Contrast piping at center front placket and shoulders
• Center front coil zipper with faux leather pull
• 2x2 rib knit at collar, sleeves and bottom opening

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 550 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Front side-entry zippered pockets
• Interior pockets
• Elastic windproof cuffs
• Folds and stows into separate pouch

• 100% polyester contour softshell
• Wind- and water-resistant
• Abrasion-resistant chin guard
• Zippered hand and chest pockets
• Adjustable cuff tabs
• Adjustable drawcord hem

• 100% polyester MTR filament fleece, 250g
• Overlay: 98/2 cotton/elastane
• Omni-WICK
• Comfort stretch
• Zippered chest pocket
• Side pockets
• Thumb holes & elastic at cuffs
• Chin guard
• Storm flap
• Heat sealed Columbia logo

• 86/14 cotton/polyester
• Half-zip sweatshirt

• 7.2 oz./yd_ (US), 12 oz/L yd (CA), 94/6 recycled polyester/elastane plain weave
• Durable water repellent finish
• Soft shell stretch fabric
• Half elastic cuffs
• Two front zip pockets
• 3-stripes on right arm
• Contrast color adidas performance logo on back neck

• 82 Gm 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• No lining 
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 5 oz./yd_, 92/8 nylon/spandex shell
• Unlined
• Classic fit
• Water- and wind-resistant
• Exposed black nylon zipper with pull tab at center front
• Zippered welt pockets

• 6.3 oz./yd_, 100% polyester French terry
• Hydrophilic finish
• Ribbed knit mock collar, cuffs and bottom
• Contrast color 3-stripes self-fabric on left sleeve
• UPF 50+ protection
• Contrast color adidas performance logo on bottom right hem

• 3.2 oz./yd_, 100% recycled polyester
• Water repellant
• Top panel heather woven fabric
• Zipper enclosure
• Two front pockets
• Elastic bungee cord bottom hem
• adidas logo on back neck

• 8.8 oz./yd_, 100% polyester MTR filament fleece
• Nylon placket with four-snap closure

• 3 oz./yd_ polyester fill, 100% 380T coated nylon shell
• Wind- and water-resistant
• Diamond quilted design
• Ribbed-knit collar, cuffs and waistband
• Nylon zipper with metal zipper pull
• Open welt pockets
• Folds and stows into separate pouch

• 100% 380T high-density nylon
• 90/10 duck down/feather filling
• 650 fill-power
• Wind- and water-resistant
• Zip-front placket with stand-up collar
• Elastic windproof armholes
• Front pockets with side entry
• Interior pockets
• Folds and stows into separate pouch

• 3.92 oz./yd_, 100% Water-resistant polyurethane
• Fully lined
• Natural drawcord
• Hook-and-loop pockets at waist

• 100% nylon 330D with Interior PU waterproof coating
• Nylon Outer Shell: Waterproof Coating = Level 3
• Inner PU Coating: Breathability/Permeability = 5,000
• Water Pressure Resistance = 10,000 mm
• DTM neck taping
• #5 DTM body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• 3 panel hood
• Scuba neck
• Round poly drawstring
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

"CLICK HERE to watch product video"