100% polyester outerwear tear away tag gray

• 2.1 oz./yd_, 100% nylon taffeta
• 100% polyester brushed tricot lining
• Water resistant
• Snap front
• Raglan sleeves
• Reinforced front slash pockets
• Elastic cuffs
  
• Open bottom
• Tear away label

• 7.4 oz./yd_, 60/40 combed ringspun cotton/polyester
• CVC colors are 55/45 combed ringspun cotton/polyester
• 100% cotton face on all dyed fabrics (colors)
• 60/40 cotton/polyester face on all heathers and printed fleece
• 3-end fleece
• Jersey lined hood with matching flat braided drawcord
• Jersey fabric back neck tape
• Side seams
• Pouch pocket
• Double needle hem on hood and pouch pocket
• Straddle stitched neck, armholes, sleeve cuffs and bottom band
• Back locker patch
• EasyTear label

• 6.5 oz./yd_,100% polyester fleece
• Regular fit
• Two stripes down raglan sleeves
• 1x1 ribbing at cuffs & waistband
• Coil kissing zipper
• Twill neck tape
• Media pocket and eyelet
• Tear away label

• 6.5 oz./yd_, 52/48 cotton/polyester blend, 32 singles
• Raglan sleeves
• Unlined hood
• Reverse coverstitch sewing
• Twill neck tape
• 1x1 ribbing at cuff, and waistband
• Tear away label

• 3.04 oz./yd_, 100% nylon satin outer shell
• 100% polyester brushed tricot lining
• Water resistant
• Snap front
• Raglan sleeves
• Striped ribbed knit collar, cuffs and bottom band
• Reinforced slash front pockets
• Machine washable
• Woven label
• Individually polybagged 

• 8.2 oz./yd_ (US) 13.4 oz./L yd (CA), 50/38/12 polyester/airlume combed and ringspun cotton/rayon pre-laundered, 32 singles
• Retail fit
  
• Unisex sizing
• Split-pouch pocket
• Rib cuffs and waistband
  
• Side seams
• Tear away label

"CLICK HERE for fabric guide & screen printing tips"

• 5.5 oz./yd_,100% polyester fleece
• Slim fit
• Exposed coil zipper
• Antique nickel zipper pull with dtm zipper pull tab
• Zipper garage
• Hidden stash pocket on back
• Thumbholes on cuffs
• Tear away label

• 2.5 oz./yd_ (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 2.9 oz./yd_ (US) 4,83 oz./L yd (CA),100% polyester fabric with interior water resistant coating
• 100% Polyester 1x1 Ribbing
• Waterproof Pressure Resistance: 600 mm
• Single layer, no lining 
• Matte Plastic #5 Zipper
• Self Neck Tape
• Welt Pockets
• Locker loop in center back
• Tear away label

• 13.8 oz., 300 gm 100% waterproof polyester shell bonded to 160gm micro fleece lining.
• Waterproof Coating: 20,000 mm
• Inner PU Coating: Breath-ability/Permeability = 5,000
• 3 panel scuba hood
• #5 water resistant zippers
• Zippered left chest pocket and welt pockets
• Media pocket
• Toggles at hood and bottom side seams
• Antique nickel eyelets
• Concealed embroidery access for embellishing
• Tear away label

"CLICK HERE to watch product video"

• 100% Nylon, exterior shell
• 100% polyester lining, 60 gm Hyper-Loft poly fill insulation
• Water & wind resistant 
• #5 reverse coil zippers at chest and pockets
• Packable pocket with #3 reverse coil zipper
• Capped elastic sleeve cuff
• Locker loop at wearers back neck
• Plastic cinche toggle at wearers right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 100% nylon, exterior shell
• 100% polyester lining, 60 gm Hyper-Loft poly fill insulation
• Water & wind resistant 
• Reverse coil zippers at chest and pockets
• Packable into chest pocket with reverse coil zipper
• Capped elastic armhole binding
• Locker loop at wearers back neck
• Plastic cinche toggle at wearers right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• Matte finish #4 reverse coil zipper
• Single layer body with fine mesh hood liner
• Three panel hood & scuba neck
• Welt pockets with mesh pocket bags
• Elastic cuffs and waistband
• Self neck tape with locker loop in center back
• Tear away label

• 100% polyester fabric with interior water resistant coating
• Waterproof Pressure Resistance: 600 mm
• Matte finish eyelets and zippers
• #4 zipper with zipper pull
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self neck tape
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 100% nylon, exterior shell
• 100% polyester lining, 60 gm Hyper-Loft Poly Fill Insulation
• Water & Wind Resistant
• #5 Reverse coil zippers at chest and pockets
• Packable pocket with #3 reverse coil zipper
• Capped elastic sleeve cuff
• Locker loop at wearers back neck
• Plastic cinche toggle at wearers right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 100% nylon, exterior shell
• 100% polyester lining, 60 gm Hyper-Loft Poly Fill Insulation
• Water & Wind Resistant
• #5 Reverse coil zippers at chest and pockets
• Packable pocket with #3 reverse coil zipper
• Capped elastic sleeve cuff
• Locker loop at wearers back neck
• Plastic cinche toggle at wearers right side waist
• Chest pocket for concealed embroidery access
• Tear away label

• 6.5 oz./yd_, 52/48 cotton/polyester blend, 32 singles
• Raglan sleeves
• Unlined hood
• Split stitch double needle sewing
• Twill neck tape
• #3 dtm coil kissing zipper with nickel pull
• 1x1 ribbing at cuff, and waistband
• Tear away label

• 100% nylon taffeta
• 100% Polyester brushed tricot lining
• Water-resistant
• Snap-front
• Raglan sleeves with elastic cuffs
• Front slash pockets
• Open bottom with drawcord