Page 5: embroidered hooded long sleeve blue

• 6.5 oz./yd, 100% recycled polyester
• Regular fit
• CLIMACOOL moisture-management technology
• CLIMAWARM insulating materials trap warmth
• Hood
• adidas heat-seal logo on left chest
• Woven label

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 7.5 oz./yd, 55/39/6 cotton/polyester/rayon triblend fleece
• Off-white zipper tape and drawcord
• Split-pouch pockets

• 8 oz./yd, 60/40 cotton/polyester sueded fleece
• Double-needle stitched throughout
• Three-piece jersey lined, contrast-color hood with sewn eyelets and contrast-color drawcord
• Contrast-color self-fabric panels on chest and arms
• Contrast twill tape at back of neck
• Side seams
• Set-in pouch pocket
• 1x1 ribbed cuffs and waistband
• Tear away label

• 8.5 oz./yd, (280gm) 60/35/5 cotton/polyester/spandex
• Four-way stretch French Terry fabric for increased mobility
  
• Standard fit
• 100% ring-spun cotton face yarns for printability
• Pre-laundered fabric to reduce shrinking
• Sewn eyelets
• Flat drawcord with capped tip
• Double layer 3-panel hood
• 320gm 1x1 ribbing at cuff and waistband
• Hidden welt pockets
• Tear away label

• 7.4 oz./yd, 100% polyester wicking double knit mesh texture
• Dry Excel moisture management properties
• Pinhole mesh lined hood
• Drawcord
• High collar
• Front zippered pocket
• Pouch pocket
• Raglan sleeves
• Half-elastic cuffs
• Woven label

• 8.9 oz./yd, 70/30 cotton/recycled polyester
• Regular fit
• Pouch pocket
• adidas embroidered logo on left sleeve
• Woven label

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 7 oz./yd, 55/45 cotton/polyester burnout fleece
• Acid washed with silicone finish
• Flatlock-stitched throughout
• Dyed-to-match drawcord
• V-notch collar
• Raw-edge seams around hood opening, shoulders, pocket seams, cuffs, waistband and side seams
• Raglan sleeves
• Pouch pocket
  

• 7.4 oz./yd.,100% polyester
• UA Storm technology repels water (uses a fluorine-free water repellent treatment)
• Updated Armour Fleece is slightly heavier
• Loose fit
• Front pouch pocket
• Binding trim at cuffs
• Contrast embroidered logo on upper sleeve

• 10 oz./yd, 80/20 ring-spun cotton/polyester
• Three piece sport construction hood to allow for decoration
• Sport shoulder panels
• Split front placket with six sewn eyelets
• Thick white flat lace drawcord
• 2x2 ribbed side gussets and panels
• Interchangeable custom-color laces can be ordered separately (style 8831)

• 5-ounce 100% polyester
• Snag-proof
• Moisture-wicking
• Odor-fighting
• Chlorine-resistant
• UPF rating of 30
• Three-panel hood
• Reinforced triple-needle stitching at shoulders and armholes
• Rib knit cuffs
• Drop tail hem
• Tear-away label

• 7.5 oz./yd, 70/30 ring-spun cotton/polyester blend French terry, 32 singles
• Black & Charcoal Heather are 55/45 cotton/polyester blend French terry
• Pre-laundered
• Unisex, slim fit
• Unlined hood
• Split stitch double-needle sewing
• 1x1 ribbing at cuffs, waistband, and side panels
• Antique nickel eyelets
• Two antique nickel tipped flat drawcords (natural contrast + one dyed-to-match)
• Natural-colored exposed zipper tape
• Media pocket and eyelet in front pocket
• Thumbhole on cuffs
• Twill neck tape
• V-notch
• Tear away label

• 12.3 oz./yd, 48/38/10/4 modacrylic/lyocell/para-aramid/spandex elastane
• RainBlock durable water-repellent
• HoodShield integrated face covering
• Large hand warmer pouch pocket with concealed zippered pocket
• Reinforced elbows
• Wash care: home wash

Certifications Level 1: NFPA 2112, NFPA 70E

Certifications Level 2: Category 3 Protection, NFPA 2112 - 2023 Compliant

Hazard: Arc Flash, Flash Fire

Protection: ATPV Arc Rating: 27

• 6.49 oz/yd., 100% recycled polyester
• UA Storm technology repels water without sacrificing breathability
• Softer, more plush inner layer traps heat to keep you warm & comfortable
• Updated Armour Fleece is slightly heavier but still breathable & stretchy
• Loose fit: comfortably away from the skin
• Binding trim at cuffs
• Front pouch pocket
• Pad-printed label

Responsible Manufacturing: the company that makes this product is Fair Labor Accredited.

• 7 oz./yd, 100% polyester moisture-management fleece fabric
• Badger Sport paneled shoulder for maximum movement
• Textured waffle weave side and underarm panels
• Poly rib cuff and waist
• No drawcord
• Pouch pocket with two hook and loop closure top pockets
• Embroidered Badger logo on left sleeve

• Flame-resistant, 12.5 oz./yd, 95% Cotton/ 5% Spandex Brushed Fleece
• Hood with drawcord closure
• Zipper front
• Hemmed sleeve with elastic
• Elastic waist
• Two patch pockets
• Home Wash

Regular sizes available under style SEH4

• 75/25 ring spun cotton/poly (Ring Spun Sport Grey)
• Brushed interior and a 100% ring spun cotton face
• Two-piece dyed-to-match jersey fabric-lined hood
• Drop shoulder
• Metal zipper
• Front pouch pocket
• 1x1 rib knit with spandex cuffs and bottom band
• Classic fit seamless body

• 8.5 oz./yd, (280gm) 60/35/5 cotton/polyester/spandex
• Four-way stretch French Terry fabric for increased mobility
  
• Standard fit
• 100% ring-spun cotton face yarns for printability
• Pre-laundered fabric to reduce shrinking
• Reverse coil zipper
• Double layer 3-panel hood
• Hidden welt pockets
• Tear away label

• 100% cotton face
• Two-ply self-fabric hood
• Dyed-to-match flat drawcords
• 1x1 rib knit cuffs and waistband
• Front pouch pocket
• Classic fit seamless body

• 7 oz./yd, 55/45 cotton/polyester inside out fleece
• Double-needle stitched throughout
• Jersey lined hood with sewn eyelets and drawcord
• Contrast twill tape at back of neck
• Side seams
• Set-in pouch pocket
• 1x1 ribbed contrast cuffs and waistband
• Tear away label

• 3.5 oz./yd, 100% polyester moisture-management/antimicrobial performance fabric
• Badger sport shoulder for maximum movement
• Self-fabric hood, no drawcords
• Badger heat seal logo on left sleeve