Page 23: Custom embroidered hooded

• 8.5 oz./yd, (280gm) 60/35/5 cotton/polyester/spandex
• Four-way stretch French Terry fabric for increased mobility
  
• Standard fit
• 100% ring-spun cotton face yarns for printability
• Pre-laundered fabric to reduce shrinking
• Sewn eyelets
• Flat drawcord with capped tip
• Double layer 3-panel hood
• 320gm 1x1 ribbing at cuff and waistband
• Hidden welt pockets
• Tear away label

• 9 oz /yd, 51/45/4 polyester/cotton/spandex
• Self-fabric lined hood with silicone dipped tip drawcord
• Set-in sleeves
• Front pouch pocket
• Hanger loop label

• 8.9 oz./yd, 70/30 cotton/recycled polyester
• Regular fit
• Pouch pocket
• adidas embroidered logo on left sleeve
• Woven label

Responsible Manufacturing: this product was made in a facility that is OCS, GRS, RCS, and GOTS certified, and the company that makes this product is Fair Labor Accredited.

• 8.6-ounce 100% polyester smooth-faced fleece
• Black bottom front and cuffs for a cleaner appearance
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
• Three-panel hood with drawcord closure
• Taped neck
• Front pouch pocket

• 5.9-ounce 100% polyester smooth-faced fleece
• Zip-through collar
• Three-panel hood with matte black eyelets and wide dip-tipped drawcords
• Molded center front zipper
• Open hand pockets

• 7 oz./yd, 55/45 cotton/polyester burnout fleece
• Acid washed with silicone finish
• Flatlock-stitched throughout
• Dyed-to-match drawcord
• V-notch collar
• Raw-edge seams around hood opening, shoulders, pocket seams, cuffs, waistband and side seams
• Raglan sleeves
• Pouch pocket
  

• 7.4 oz./yd.,100% polyester
• UA Storm technology repels water (uses a fluorine-free water repellent treatment)
• Updated Armour Fleece is slightly heavier
• Loose fit
• Front pouch pocket
• Binding trim at cuffs
• Contrast embroidered logo on upper sleeve

• Shell: 50D 73 g/m2 100% recycled polyester with non-PFC durable water-repellent finish
• Insulation: 100 g Heatseeker 70/30 post-consumer recycled polyester/polyester insulation in body
• 2x2 square quilting
• Stretch binding at hood and cuffs
• Self-lined hood
• Interior chest pocket
• Dyed-to-match zipper pull
• Reverse-coil center front zipper with interior draft flap
• Secure-zip hand pockets
• Interior waist cord lock

• Shell: 12 oz./yd, 100% cotton sanded duck
• Body Lining: Heavyweight sherpa
• Sleeve Lining: Medium-weight insulation quilted to polyester taffeta
• Three-piece lined hood with drawstring
• Extended back for extra warmth
• Hidden knit storm cuffs
• Pleated elbows and action back, plus snap-close side vents, provide added mobility
• Triple-needle stitched main seams hold up to tough tasks
• Heavy-duty brass front zipper
• Three inside chest pockets, left with zipper closure
• Two angled front welt pockets conveniently store items

• 8.5 oz./yd, 91/9 recycled polyester/spandex
• Breathable PrimoLite mesh
• Moisture-management properties
• UPF 30+ protection
• Precise active fit
• Low profile ANETIK logo on right shoulder
• Zippered pocket on back right side
• Heat-seal label

• 75/25 cotton/polyester (Heather Gray)
• 100% cotton face
• Shoulder to shoulder binding
• Tear-away label
• Halfmoon at back neck
• Hoodie with no drawcords
• 1x1 rib knit collar
• Dropped shoulders
• Front pouch pocket
• Side seamed
• 2x2 rib knit cuffs and hem

• 10 oz./yd, 80/20 ring-spun cotton/polyester
• Three piece sport construction hood to allow for decoration
• Sport shoulder panels
• Split front placket with six sewn eyelets
• Thick white flat lace drawcord
• 2x2 ribbed side gussets and panels
• Interchangeable custom-color laces can be ordered separately (style 8831)

• 100% polyester shell 100% polyester quilted lining
• 8000MM fabric waterproof rating
• Fully seam-sealed for added waterproof protection
• 3000G/M fabric breathability rating
• Snap-off adjustable hood
• Storm flap
• Two-way Vislon zipper with ergonomic pull
• Waterproof welded sleeve pocket
• Waterproof zippered pockets
• Hand warmer pocket
• Bellow pockets for storage
• Molded adjustable tab cuffs with hook and loop closures
• Interior media pocket
• Open hem with drawcord and toggles

• 5.2 oz./yd, 100% recycled polyester jacquard fleece
• Athletic fit
• Unique checkerboard grid fleece pattern created airflow grooves that boost breathability and trap heat
• Low-profile, three-piece scuba hood with elastic binding
• Zippered chest pocket with stretch woven fabric
• Zippered hand pockets
• Flatlock seams
• Elastic-bound cuffs with thumbholes
• DTF logo on left chest and embroidered logo on right arm

• 12.5 oz./yd (420gm), 75/25 ring-spun cotton/polyester 3-end fleece with 100% cotton face yarns on solid colors, 21 singles
• Grey Heather is 52/48 ring-spun cotton/polyester
• Premium heavyweight
• Specialty yarns for a durable dry hand feel
• Oversized fit
• Drop shoulder
• No drawcord
• Double layer single piece hood
• #5 nickel kissing zipper
• Blindstitch sewing on all seams for an understated simplified design
• 100% cotton 1x1 ribbing at cuff and waistband
• Tear away label (woven label on Pigment Black)

• 100% polyester with water-resistant finish
• 100% polyester fleece lining
• Fabric waterproof rating: 1000MM
• Fabric breathability rating: 1000G/M2
• Triple-needle stitching
• Full snap closure
• Two chest pockets with flaps and snap closures
• Reinforced open front pockets
• Adjustable snap cuffs

• 8.6-ounce 100% polyester smooth-faced fleece
• Black bottom front and cuffs for a cleaner appearance
• Durable reflective 2-inch tape meets ANSI 107 requirements and provides 360-degree visibility on body and sleeves
• Three-panel hood with drawcord closure
• Taped neck
• Front pouch pockets
• Molded center front zippered closure
• Rib knit cuffs and hem

• ANSI/ISEA 107 Class 3 certified
• Water resistant 100% PU shell 100% polyester backing
• 8000MM fabric waterproof rating
• Snap-off hood with drawcord and toggle for adjustability
• Two-way black Vislon zipper
• Internal storm flap
• Half-elastic adjustable tab cuffs with hook and loop closures
• 2-in. wide reflective taping on front back and sleeves
• Two welt pockets
• Drawcord hem with toggle adjustability
• This garment must be fully zipped to be in compliance with ANSI/ISEA 107 standards

• 5-ounce 100% polyester
• Snag-proof
• Moisture-wicking
• Odor-fighting
• Chlorine-resistant
• UPF rating of 30
• Three-panel hood
• Reinforced triple-needle stitching at shoulders and armholes
• Rib knit cuffs
• Drop tail hem
• Tear-away label

• 100% poly twill face fabric bonded to a waterproof laminate-protecting grid print
• 10k/10k waterproof breathable fabric
• Features+Benefits
• Fully seam-sealed
• Durable water-repellent (DWR) finish
• Adjustable brimmed hood with locking drawcord
• Interior locker loop
• Waterproof zipper
• Full-length interior storm flap with chin guard
• Hidden reverse-coil zip pockets