embroidered wind resistant hooded

• 5.2 oz./yd_, 97/3 recycled polymide/elastane
• Durable water resistant - PFC free
• Full-zip closure
• Large front pockets
• Embroidered logo on left chest

• 2.36 oz./yd_, 100% polyester
• StormShield water-resistant, DWR finish
• Easy to pack jacket into built-in packable pocket pouch
• Packable hood with hidden drawcords
• Zippered hand pockets
• Elastic cuffs

• 2.5 oz./yd_ (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Scuba collar with hood
• Adjustable bungie drawcord at hood and bottom hem
• Exposed dyed to match nylon coil zipper
• Set-in sleeves
• Lower front on seam pockets
• Encased elastic cuffs
• Champion "C" patch on left sleeve
• Woven label

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 3.5 oz./yd_, 100% water-resistant polyurethane
• 190T 100% polyester taffeta lining
• Natural drawcord
• Hook-and-loop closure pockets at waist

• 3.4 oz./yd_/115 gsm (US), 5.7 oz./L yd (CA), Polyester microfiber twill
• 2.95oz. insulation in body and 1.7oz in sleeves
• Polyester brushed tricot lining in body
• Roll-away hood
• Brushed tricot-lined collar and chin guard
• Elasticized cuffs
• Storm flap with snap closure at bottom
• Centre front auto-lock zipper with reflective toggle
• Lower brushed tricot-lined concealed zippered pockets
• Thermal retention shock cord at hood and drop back hem
• Audio port access through inside left pocket
• Reflective piping at shoulder yoke and center back yoke

• 100% polyester
• 4 layer filtration system provides basic protection against non-toxic dust, smoke and other non-toxic particles found on the job site
• Concealed reflective piping along hood, front and back chest seams for better low light visibility
• Cuff inserts with thumbhole at sleeve hem
• Durable lightweight lime water-resistant ripstop shell with lining
• Adjustable hood
• 2 wide high-performance reflective tape
• Durable black water-resistant ripstop in high-wear areas, along the sides and under the arms
• Tall collar design with asymmetrical zipper to avoid chaffing
• Left chest pocket with a zipper closure
• Lower slash pockets with a zipper closure

• 7.8 oz./yd_, 100% nylon taffeta outer shell
• 75/13/12 polyester/rayon/cotton grey heather fleece lined body, sleeves and hood
• Water resistant
• Hood with drawcord and sliders
• Set-in sleeves
• Inside storm flap
• Reinforced slash front zippered pockets
• Elastic cuffs and bottom band
• Woven label
  

• 2.8 oz./yd_ (US), 4.7 oz./L yd (CA), 100% polyester micro poplin
• Wind- and water-resistant
• Half-zip hood with adjustable bungie cord
• Dyed-to-match coil zipper
• Encased elastic cuffs
• Adjustable waist drawcord
• Front entry hidden pouch pocket
• Packs into mesh lined pouch pocket
• Champion "C" patch on left sleeve

• Proud member of the U.S. Cotton Trust Protocol.
• Made with OEKO-TEX certified low-impact dyes.
• We reduce plastic waste by the removal of polybags from all products except color White

This product meets the following Sustainable Style subcategories:

Socially Conscious Manufacturing: This product was made by a mill that has partnered with or is accredited by the Fair Labor Association

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Dyed to match neck taping
• #5 dyed-to-match body coil zipper
• Matte metal zipper pull
• Rubber zipper pull tab
• Zipper garage
• Single layer body with fine mesh hood liner
• Matte nickel metal eyelets
• Three panel hood
• Scuba neck
• Round poly drawcord
• Hidden snaps inside front pocket flap
• Side slit pockets
• Tightening toggle at waistband
• Elastic cuffs
• Tear away label

• 100% nylon 330D with interior PU waterproof coating
• Nylon outer shell: waterproof coating = level 3
• Inner PU coating: breathability/permeability = 5,000
• Water pressure resistance = 10,000 mm
• Classic fit
• Unlined hood
• No lining
• Self-neck tape
• Antique brass eyelets (black/black color = matte black metal eyelets)
• Antique brass 6 snap front closure (black/black color = matte black metal snaps)
• Elastic cuffs
• Underarm grommets
• Drawcord closure at hood and bottom opening
• Tear away label

• 2.1 oz./yd_, 100% nylon taffeta
• Water resistant
• Hood with drawcord
• Elastic cuffs
• Folds up into its own zippered front pocket
• Set in sleeves
• Open bottom

• 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• Matte finish eyelets and zippers
• #4 zipper with zipper pull
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• Matte finish #4 reverse coil zipper
• Single layer body with fine mesh hood liner
• Three panel hood & scuba neck
• Welt pockets with mesh pocket bags
• Elastic cuffs and waistband
• Self-neck tape with locker loop in center back
• Tear away label